I have 2 problems on 2 seperate DK424 C/D 4.3,

#1 has a T1 with Qwest and over the weekend we lost the ability to hook flash on channels 1-16, 17-24 can still hook flash. And we cant receive calls on channels 13-24, but can call out on them. When I press Flash I get an F on the lcd but it doesnt do anything. Qwest of course said they didnt do anything and say its on our end. I know I didnt change any programming. Is there even a way to do this with the 424. :bang:

#2 I installed a PRI into one of our systems and everything works great but I cant flash out. I dont get the little F when I press flash. I have 499 programed in on 39. The flash key works for the pots lines we have just not the PRI, so im sure I missed something in the programming. Thanks
:scratch:

:banana: :banana:

Is the PRI from Quest also, around here some carriers won't do a flash on PRI (most will)

No its with Eschelon. They say the can do it, but who knows. Im just trying to figure it out before the lines port over next week. Thanks

:banana: :banana:

#1 Problem solved, it was a qwest issue.

#2 still a problem.

CTX/CIX and DK do not support PRI flash.

So you can flash on a T1 but not a PRI?

Correct.