Hello everyone, I changed a setting in my new IVP8 Rel-2 and now the ports aren't answering. I have done all programming using the modem as I can;'t seem to connect via port 2 on the faceplate. Ideas as far as settings ?
New TAIS IVP-8 Rel 2 black faceplate.
Thanks !!
what baud rate do you have it set at ?? should be 57600
hello, yes it's at 57600, good com port on laptop, TAIS db-9 cable on port 2
also , status is solid green...
did you change the integration type?
what setting did you change?
make sure you are plugged into the upper com port not sure if its 2 or 1.
you can watch it boot with hyper terminal.
set hyper term up with 57600 N 8 1
plug into lower com port and reboot vm and watch its boot process. let us know what it says at the end...
Thanks for the response !! Ill do that now...
No, did not change the integration type, just which port to use for MSG purposes, ( I thought)
Last line during normal appearing boot up'''
"scannning m,ailboxes on C: ... done"
I'll buy whomever helps get this thing back up a darn good lunch somehow... !!!