Hi, our telephone vendor provided us with a RBDB2A for our 424 system but it the box has no battery cables, only the PSU cables.

Does anyone know of a source for the battery cable or at least the connector? Also, there are no instructions with this device, can someone guide me thru the setup?

Thanks!

I'll look when I get home......

Thanks!

The I&M manual says that 6 RBTC1A cables are supplied with the RBDB2A

Thanks for the reply.

Correct, that is what I have. I don't have the power cables or any idea what connector to purchase.

Is there a chance I could get a copy of the I&M manual or is it available online? This is a seperate I&M for the RBDB2A only, correct? I have the Strata I&M but did not find any reference to the RBDB2A

Even a pdf scan or picture scan would be great. You can send it to [email protected]

Thanks!

I think I have one collecting dust on the shelf

Special thanks to Steve Mull for helping me find the information needed. It would appear the RBDBs do not come with the battery cables.

So I am in need of three RBTCIA-2M cables to connect my batteries. Any recommendations on vendors who can provide the cables?

Thanks!

Thanks for the help. The cables I need are the RBTCIA-2M. I need three of them. None of the Toshiba dealers I have talked to have these cables in stock. So if anyone has a used RBDB2A that was pulled from a system AND has the battery cables, I would like to purchase it.

Email me if you have one to sell. Thanks.

We purchase the RBTC2A 1.5M designed for the 424 from Teleco.

Hi, it is the RBTC I A-2M cable not the 1A or 2A. I am trying to get the battery cables, not the PSU cables. Thanks.

Yes, we purchase them from Teleco.

Ok Thanks, I am an end user, it doesn't look like I can purchase from them.