Im running into an issue with a 2-node(node 10 and 11) IP QSIG using LIPU and centralized VM(iES32)in node 10. I have the dial 0 out of vm pointed to PhDN 500 which is on several ext's on node 10 ringing some immediately and a few others on a delay. I want to have that do the same thing on node 11 however when I try to assign PhDN 500 on any ext on node 11, I get a "DN conflict" error. I have downloaded and uploaded the network DN tables to both nodes and made sure that 500 was one of them. Can this be done and I am missing something or is it impossible? Or is there a different way to accomplish this. FYI, everything else works as far as QSIG goes, DSS lights, intercom without adding the node ID, LCR, etc. I also cant create a MCG in node 10 and include ext's from node 11. Tried with and without node ID's.

I dont think you can have PHDN 500 show up both places...

The systems are not integrated like that.

The nodes cannot "share" extensions....

You can not ring 2 phones at 2 sites across a Qsig at the same time, using MCG or phantoms. It would not let you create a PhDN of 500 if it already exist in the Network DN table. The PhDNs don't work accross qsig.

Not everything works perfectly across a QSig. They are really 2 switchs connected, rather then 2 parts of 1 big switch. Just try parking and calls accross qsig.

Thats kinda what I thought just never tried it until now.