I have 5 phones that I programmed 5 phantoms on. I have directed the CO's to what I thought is flahs and ring these phantoms in program *81/*87, but the phanotms just flash. I did turn on the phone ports I want to ring for my phantoms in program *71.

I do have an owner assigned to the phanotms.

What am I missing to make the phantom ring when the CO is called?

Did you do prog 81/87 for the 5 ports?

No because you can't program CO lines to a phantom.

What I am trying to do is have 5 CO Lines ring a phantom that has 4 others in a hunt group. I needed to do it his way so that if the call isn't answered it will go to a mailbox.

The other thing I didn't mention is that if you call the phantom directly it rings, it just doesn't ring when you call the CO line that is pointed to it in *81/*87.

I believe you'll still need to make the lines ring the phones in 81/87

Right. I was referring to the PDN port of each of the 5 phones that have the PhDNs appearances.

So I make the CO lines ring the PDN I have the phantom programmed on? Coul di t be that simple?

Yes.

I will give that a try - thanks!

That worked phonemeister - Thanks!