ECF-ALL BUTTON - 10/26/11 03:43 PM
Cant remember the steps to program the destination for the ECF-ALL button
Re: ECF-ALL BUTTON - 10/26/11 04:43 PM
Just from memory, #9876, hit the CF key, enter the number, hit the CF key again... finished.
Hope that was it!
Hope that was it!
Re: ECF-ALL BUTTON - 10/26/11 05:37 PM
Don't forget to enter the 9 for the external line access then the phone number followed by #
so it should be:
#9876 CF Key 9 phone number # CF Key
so it should be:
#9876 CF Key 9 phone number # CF Key
Re: ECF-ALL BUTTON - 10/26/11 05:41 PM
Also from memory, an external number should be in the format (assuming 9 is line access) 9 + number + #, then press the CF key again.
Also optionally you can toggle the intercom keys that the CF button will control. Normally it will CF the bottom intercom keys, but in some cases you could have multiple intercom keys and you may wwant to light all of them.
Also optionally you can toggle the intercom keys that the CF button will control. Normally it will CF the bottom intercom keys, but in some cases you could have multiple intercom keys and you may wwant to light all of them.