atcomsystems.ca/forum
Posted By: Burgie13 Adding PCOU2 card to DK280 - 08/11/12 12:49 AM
I got pushed into adding a PCOU2 CO card to a Toshiba DK280. There is one existing DK280. I need some help changing the programming to add the card and new lines.
Posted By: KENB Re: Adding PCOU2 card to DK280 - 08/11/12 01:41 AM
A PCOU or an RCOU ??
Posted By: KENB Re: Adding PCOU2 card to DK280 - 08/11/12 01:44 AM
A PCOU or an RCOU ??
Posted By: Burgie13 Re: Adding PCOU2 card to DK280 - 08/11/12 02:05 AM
It is a PCOU card there is one of these cards existing in the system. Thanks,
Posted By: phonemeister Re: Adding PCOU2 card to DK280 - 08/11/12 06:41 AM
Program it as if it was an RCOU. The DK doesn't know the difference.
In program 03 it will be an 11 in whatever slot you put it.

As far as line numbering, each port counts as one with the first RCOU or PCOU being 001 to 004 or if it a RCOU/RCOS combo card 001 to 008.

Don't forget you have to power down the ksu for 5 seconds to make the change permanent.

Thank you for allowing us to go back and edit, that works now.



© Sundance Phone System Forums - VOIP & Cloud Phone Help