atcomsystems.ca/forum
Posted By: CPOChris 424i Cable cutover no incoming - 04/14/14 04:33 PM
Working on porting over a customer from Verizon to cable pri. My outgoing service is fine incoming doesn't work. I have the pilot did for testing put into program 71 and ringing to program phone. I get 2 rings and a busy. Caller I'd is disabled and it's 4 digits being sent. Cable says everything is fine on their end it's something with my programming. Any help is appreciated.
Posted By: www.telcom1.net Re: 424i Cable cutover no incoming - 04/15/14 01:36 PM
if cable is using meta switch good luck, seems the 424 has trouble keeping timing with the meta switch

may be a good time to upgrade to cix
Posted By: CPOChris Re: 424i Cable cutover no incoming - 04/15/14 03:17 PM
I believe it was in *66-5 and make it wildcards.
Posted By: CPOChris Re: 424i Cable cutover no incoming - 04/15/14 04:54 PM
So I still have no luck. Changed *66-5-103 from main number to wildcards a d still no incoming. I can not figure out for the life of me why it won't take the incoming calls. Any help would be appreciated. My supplier is scratching his head.
Posted By: phonemeister Re: 424i Cable cutover no incoming - 04/15/14 05:20 PM
I PM'd you.
Posted By: CPOChris Re: 424i Cable cutover no incoming - 04/16/14 09:51 AM
So the culprit was *66_6 no leds were light.
© Sundance Phone System Forums - VOIP & Cloud Phone Help