Quick question, I know this has probably been brought up before, but I couldn't find anything when searching.

CIX40 with Voicemail, Auto-Att. answers on the first ring.

When setting up CF-All Calls to a cell phone, the calls were looping back because of the H in the VM. So I removed the H. But now when calls are coming through to non-forwarded phones, it's not displaying caller ID, it's just showing that it's a transfer from voicemail.

Am I messing something up or missing something?

Until the voice mail hangs up (H) the call is from the voice mail. and displays as such.Try putting a U at the end of the extension in the voice mail, this makes the voice mail wait to hear a ring before it hangs up.

Oh ok. I'll give that a shot. Thanks!

Any other ideas?
The 'U' doesn't seem to be making a difference.

How do you guys normally set this up?
If someone wants to use remote call forwarding and they also use voicemail? Is that just the tradeoff, you don't get Caller ID anymore?

Use CF-NA, set to 8 seconds.

This works.