atcomsystems.ca/forum
Posted By: DD782 IVP8 Rev.2 - Changing Bit from 7 to 8 - 08/25/19 08:01 PM
I changed the # of Bits from 8 to 7. Now I can't use Stratagy on my Laptop to get into it. What are my options to reset this? Thanks, LYLE
Posted By: newtecky Re: IVP8 Rev.2 - Changing Bit from 7 to 8 - 08/25/19 08:50 PM
Statagy VM manager is propriety. Might have to factory reset it the voicemail.
Posted By: DD782 Re: IVP8 Rev.2 - Changing Bit from 7 to 8 - 08/25/19 09:10 PM
Are you saying the factory has to reset it, or can I reset it with a laptop somehow?
Posted By: newtecky Re: IVP8 Rev.2 - Changing Bit from 7 to 8 - 08/26/19 05:52 AM
Actually I was thinking of an LVMU where you can pull the battery to reset. The IVP8 is a but more complicated, although there is probably a short cut if you have a CF card reader.

Although I didn't think about the obvious answer which is to use the built-in modem and dial into the voicemail.
Have you tried changing your settings in Windows to 7 bits? If that doesn't work, try connecting with a modem via an SLT port. Worst case if you still can't get in, PM me.
use a compact flash reader and go into the install.cfg file and you can fix it in there with notepad.
Posted By: DD782 Re: IVP8 Rev.2 - Changing Bit from 7 to 8 - 08/28/19 01:32 AM
THANKS, WORKED GREAT
© Sundance Business VOIP Telephone Help