Hello, is there a quick way to setup in emanager for a CIX670 to have a number be able to call in to a DID and be able to access and use all call page? I know there would be a few ways to do it internally and also with a VOIP phone but this user is off site and mobile without a desk to use voip desk phone. I thought there'd be a way to do it in the VM part but that is on ipedge and I'm pretty sure that will just call up the paging in the phone system in there which goes nowhere. Maybe a scripted thing in voice assistant maybe make a dial for access to it also to stop and spam calling bots from getting into it, not sure. I know it would make it more difficult but not sure if I have much more options.

I do know when I throw #30 into a DID and call it disconnects Thank you in advance if anybody has an idea to share.

For the CIX, I have setup DIT tonight bell to ring at night, but I don't think I have ever set up a DID or DIT to the paging adaptor. It probably isn't possible by design.

I set up paging using the IPEdge. In my script, I was paging to 2 different sites. I think a script to page would be pretty easy to do. If this is a number that can be dialed from anywhere, then I would agree that you should have a short menu to prevent robocalls.

Take a look at the IPEdge scripts and let me know if you need some assistance.

Try DISA. But I would think that the volume would be low if the user is trying to page over a trunk line on a cell phone.

Thanks guys, Im thinking though I'm sure that the ipedge isn't hooked up to the paging system just the CIX. DISA I'll looked into.

Note

To call another station after completing a
DISA station call, the internal party must
transfer you. Station and System Page cannot
be accessed on DISA calls.


So yeah ill probably just set a voice assistant port to get called and have a default script it runs which would be something like answer wait for user to push 1 and then have that extension dial #30 something like that.
I don't think they have anything setup for a sip phone on android and I'm sure theirs nothing that even works anymore for android to toshiba system + nothing is setup in the firewall which would make this simple request blown out of proportion with time.

When I first created a script it was specifically using a IPEdge app server on 2 CIX 670 systems that were connected by QSIG. I used the IPEdge to record a prompt and then page to each CIX system.

I did have an issue with paging over QSIG, that needed to be fixed by Toshiba, but it worked perfectly on the local system.

Just supply a Snom PA1 it is a SIP extension to PA interface.
When you call the SIP extension it auto answers and opens up the speech path to the PA port.

Like using those PI-DKT adapters.

Yeah I already have a paging system to work with. Its such a weird request but oh well I'll see if I can accommodate any request someone ask of me.

If your vm is a Mas or ies you can set it up to do the page. I've done this before and it worked well.

look up Article # 2547 in web knowledge base on fyi.

That is a pretty good article, but the OP has an IPEdge app server. I think it is even easier to do this on an IPEdge. I just did it with 3 lines in a script mailbox, Menu, record a prompt, Page.
FYI Article # 3448 ia partially what the OP is trying to do, except for the record part.