Hello all
I am new to the site and new to the DK40. I recently purchased a business with a Dk40 system. I upgraded it with a tciu2a card for the caller id but I can not find any info on how to program the system for the new card

Any help will be appreciated

Mike

you're going to need the programming manual... which is available on this site, in the subforum under this one...

Even with a manual, the DK systems are not easy to program.

Well I found a programming manual stuffed in a box with other phone gear. Now on to the task of programming.

Thanks guys for the help

Mike

congrats on conquering step 1.
things to keep in mind:
caller id only shows up while the phone is ringing, on phones that aren't currently in use (which is why I end up having 2 phones on my desk)
the system will only log missed calls in the callerid history, answered calls only show up in the smdr output.
that being said... these things seem to last forever.

Thanks Guys for all the help--Caller id is now in full operation on all Co Lines

My next issue is my cordless phones on ports 008 & 009 ring-answer and can dial a station but they can not access a CO line to place a call. Any thoughts?

Check program 16 (0), and programs 40 & 41.