On the STS what program do I enter to allow, when I pick up, go to a line instead of intercom. Thanks Tony
You are looking for 2 areas. Both are in station programming.
The first thing you are looking for is button programming for the station. You need to program a button. If you want to grab a particular line, like line 3, create a button for line 3 access. Or more than likely you want to program a POOL key.
Then you need to go to OFFHOOK PREFERENCE XXY. If you programmed button 01 then you put in 01+1. The plus one turns that button on when you pick up the handset from an idle state.
It should be Flash 50, page B, i don't remember the particular buttons.
Pool Key: Flash 50, Button 11, XX 3 01 (where XX is the button nnumber)
Pick Up: Flash 50, Button 10, XX 1 (where XX is the button number you used above)