atcomsystems.ca/forum
Posted By: nfcphoneman DHS-E 3x8 Cards - 08/29/07 10:43 AM
I seem to recall that the DHS-E could not use all revisions of the 3x8 card. Some of the older 3x8's would not work properly. Does anyone else remember this and if so, what was the minimum revision number?

Thanks,
Larry
Posted By: Ted Re: DHS-E 3x8 Cards - 09/04/07 07:03 PM
Hi Larry. The manual page 3.5 shows rev #. I had a problem adding a card awhile back. It ended up being the extender ribbon cable. Yuck. I just bypassed the extender, took off the mounts and secured the card close enough to plug it in. Wire and tape and glue till they upgrade I guess.
ted
© Sundance Business VOIP Telephone Help