atcomsystems.ca/forum
Posted By: spjindy Vodavi STSe - 01/28/10 07:34 PM
I need quick ref foor my brother in LV.

3 CO 4 ext. Intercom, PA.

He knows the wiring, needs initialization. He and i know the 6x16, 12x24, 48/96 triad, but at moments notice i am not familiar with STSe. I'm in Indiana, can't drive down the street and help him. Anyone who can help with the basic init. to set the thing going?
Posted By: MnDave Re: Vodavi STSe - 01/28/10 10:07 PM
If you just want to reinitialize the system, set dip switch 8 to be the same as the other 7 switches, turn the battery switch to off and power cycle the system. Then after the system comes back up, return switch 8 to off. As far as programming goes, if you are familiar with the Triad, the programming is pretty much the same
Posted By: oobie Re: Vodavi STSe - 01/29/10 05:16 AM
MNDAVE, make sure you put the battery switch back if you change the position!!
Posted By: adteldon Re: Vodavi STSe - 01/29/10 11:10 AM
LOL, thats the same thing I was thinking oobie! You were too eager on that one Dave, lol.
Posted By: MnDave Re: Vodavi STSe - 01/29/10 03:44 PM
Thanks guys. I guess I was just a little tired.
© Sundance Phone System Forums - VOIP & Cloud Phone Help