atcomsystems.ca/forum
Posted By: Bruno Busnardo 3501 on hold message - 06/28/11 03:27 PM
First off, I am totally unfamiliar with phone system operations, setup, etc. in general, but am smart enough to figure out just about anything thrown at me. What I have is a controller, model #3501-00 SFE900411. The phones show that they are Starplus STS 24 button DKTU part #3515-71, ISS:1 Rev: 1.3.

I'd like to add an on hold message that I have saved as an mp3 or wav file. Is this possible with this system and what are the steps to making this happen?
TIA
Posted By: Derrick Re: 3501 on hold message - 06/28/11 04:21 PM
Connect the one pair wire from the music source to pins 48 and 23 violet green/green violet (pair23) from the cable marked cos on the control unit. MOH is enabled by default.
© Sundance Phone System Forums - VOIP & Cloud Phone Help