atcomsystems.ca/forum
Posted By: chazrc Siemens Hicom 150H - 11/22/04 05:10 AM
Anybody have the T1 pinouts for this system?
Posted By: BIGDOG3c Re: Siemens Hicom 150H - 11/22/04 07:16 AM
your typical pins outs for a T-1 are 1,2,4,5.

Let me see if I can dig up my HICOM manual. I have not worked on one of these for a couple of years.

------------------
[Linked Image from home.columbus.rr.com]
Posted By: BIGDOG3c Re: Siemens Hicom 150H - 11/22/04 07:40 AM
Well if your looking for the pin outs to the TMST1 MODULE

I hope this helps.

TMST1 Module

pair....color....backplain....module
18......blu/wht.....43........Receive Ring
18......wht/blu.....18........Receive Tip

22......ora/wht.....47........Transmit Ring
22......wht/ora.....22........Transmit Tip

------------------
[Linked Image from home.columbus.rr.com]



[This message has been edited by BIGDOG3c (edited November 22, 2004).]
Posted By: chazrc Re: Siemens Hicom 150H - 11/22/04 12:03 PM
This is what I remember it to be off the anphenol cable. Look familiar?

Yellow Green pin 1
Green Yellow Pin 2
Violet orange Pin 4
Orange violet Pin 5
Posted By: BIGDOG3c Re: Siemens Hicom 150H - 11/22/04 01:34 PM
sounds right since pair:

18 is yellow green and 22 is violet orange

------------------
[Linked Image from home.columbus.rr.com]
Posted By: chazrc Re: Siemens Hicom 150H - 11/22/04 02:53 PM
Thanks Big Dog...
© Sundance Business VOIP Telephone Help