Anyone know how to set up an NEC Elite48 system for remote dialup for management of system and voicemail? Thanks

A MIFM card w/ a MDM module in slot 1 will do the trick. SAT is the program used to connect. I have all in stock if needed.

you can get a modem card for the voicemail as well.

or the cheapo route......mifm card+external modem connected to com1 on system to remote into system.

same can go for the vm too. external modem connected to the vm serial port.

you'll still need some sort of lines going to the modem(s). analog ports would work if you have a couple you can spare.

otherwise the mifm+modem+vm modem would be the way to go. sli cards aren't cheap.