atcomsystems.ca/forum
Posted By: ljubb4222 modem setup - 07/14/04 07:47 AM
I have many of the post on this but I want to be clear.
(nec 48 software 8.71,MIFM card with CallerID)16 EXTs
I installed a modem on MIFM. Assigned EXT #111 in 1-8-38. What assignment in 7-2 (currently port 12=NON)? Also I assume I have to assign a CO to answer only EXT 111.
Anything else?
Thanks
Lane
Posted By: DrPbx Re: modem setup - 07/14/04 07:07 PM
MIFM must be in slot #1, not an ISA slot.
Posted By: chrislebeck Re: modem setup - 07/14/04 08:14 PM
or you just have a mifm and an external modem connected to com1.

be sure mifm is assigned in 7-1


you could be transferred to ext 111. or if you have a vm, build a transaction box 111 to just transfer

[This message has been edited by chrislebeck (edited July 14, 2004).]
© Sundance Phone System Forums - VOIP & Cloud Phone Help