atcomsystems.ca/forum
Posted By: capitol DS1000/2000 - Release Button - 12/30/04 02:38 PM
Working on a DS1000. Does anyone know the feature code for adding a release key to a phone? I looked in the manual and couldn't find anything on it.

------------------
| Telephone Systems | Voice & Data Cabling
Posted By: ttech Re: DS1000/2000 - Release Button - 12/30/04 07:46 PM
The Release key is only a Soft key on the display phones, It cvan't be programmed onto a button.
Posted By: capitol Re: DS1000/2000 - Release Button - 12/30/04 08:41 PM
I noticed that. But the RLS soft key function is only there while dialing, then goes away when you are connected. Is there a way that I can have that as a permenant soft key?

------------------
| Telephone Systems | Voice & Data Cabling
Posted By: clgjr Re: DS1000/2000 - Release Button - 01/01/05 06:07 PM
What sw ver do you have? On 3.21.00 the release soft key shows on every type of call itcm or co. If you have a 2-line display you may have to press the (more) soft key untill it shows up. this is not the case for super displays.
Posted By: capitol Re: DS1000/2000 - Release Button - 01/01/05 06:17 PM
I upgraded to 3.21 about a month ago. Tried it again...still nothing on CO calls, only on intercom.

------------------
| Telephone Systems | Voice & Data Cabling
Posted By: clgjr Re: DS1000/2000 - Release Button - 01/01/05 09:47 PM
What exactly are you trying to acomplish?
Posted By: clgjr Re: DS1000/2000 - Release Button - 01/25/05 06:55 PM
If you absolutely need to release the line you could enable and use "forced trunk disconnect" in class of services.
© Sundance Phone System Forums - VOIP & Cloud Phone Help