I have a NEC 2000IPS system that the voice mail goes out every 3 months on. The voice mail server is and external server connected to the nec via an 8CLS and a serial cable to a AP00 card for SMBI. Normally only the server requires a reset and everything is fine.

The last time that didn't work and now all the light on the 8CLS are blinking.

Help?

If your ports are blinking on the card that means they aren'y programmed in CM 10 or CM14.
Is this card in a PIM all by itself?

------------------
Bound to cover,
just a little more ground.

The unit has 2 PIM,

The lay out is as follows (Not exactly will have to update)

Top PIM1
0 1 2 3 4 5 6 7 8 9 1 1 1 B
0 1 2
8 4 8 E 3 E E E E
C C C M 2 M M M M
L O L P I P M M M
S T S T P T T T T B
Y L Y Y Y Y U---|
A S |
|
Bottom PIM0 |
0 1 2 3 4 5 6 7 8 9 1 1 1 B |
0 1 2 |
8 8 8 8 8 A E E E T C |
D D D D D P M M M 1 P |
L L L L L 0 M M M C 2 |
C C C C C 0 T T T A 4 B |
P P P P P 0 Y Y Y R A U---|
D S

Anyway it's the 8cls card at PIM1 LT00 that
is connected to external voice mail system.
Use to be every 3 months we would have to reset the unit, but now the PBX it self seems to have lost the informaiton. So I am kindof wondering why it was lost in the first place and the best way to remidy this in the future.

Ben

my diagram got a little messed up
i will have to redo it.

I suppose to answer your question directly.
No it's not the only card in the PIM. In that pim there is the following card

00 8CLS (All ligths flashing)
01 4COTS
02 8CLS
03 Space
04 Space
05 32IPLA-A
06 Space
07 SPace
08 Space
09 space
~

In the PIM Below there is
00 8DLCS
01 8DLCS (BL5 flashes all the time)
02 8DLCS
03 8DLCS
04 8DLCS
05 Space
06 AP00-B
07 SPACE
08 24PRTA
09 SPACE
10
11
12 CP-24A



[This message has been edited by benhadad (edited January 27, 2005).]