atcomsystems.ca/forum
Posted By: eddie.runne DTU-16d-2 - 02/23/05 08:41 AM
IS there any way to program extra keys on one phone. Example: One phone 3 installers. how can i get this to work, or any other ideas, this is on a 48-192. Thanks everybody.
Eddie
Posted By: chrislebeck Re: DTU-16d-2 - 02/23/05 05:45 PM
do you mean as dss keys?

if so then they have to be set as feature access in system programming. then you can go to the phone and do a:
feature
redial
one of the buttons
1
the ext number of the other people
feature

that button will lightg up when they are on the phone and you can hit that buttton to call that person
Posted By: eddie.runne Re: DTU-16d-2 - 02/24/05 07:42 AM
Thanks again, I might have to change your name to Mr. Stress Reliever, thanks again...
Posted By: chrislebeck Re: DTU-16d-2 - 02/24/05 04:04 PM
anytime
Posted By: eddie.runne Re: DTU-16d-2 - 03/01/05 11:50 AM
It sounds like this would be system wide, I mean the four bottum keys are lines, or station numbers. But i would like to know what mem block and any info you could pass on.
Posted By: chrislebeck Re: DTU-16d-2 - 03/01/05 04:29 PM
only way to copy a complete set to another one is to use the sat software & have a mifm card.

only other thing you can do is to do a set copy. it will not copy the feature access buttons or dss.

it would copy lines, dnd, headset, etc. only hard buttons
© Sundance Phone System Forums - VOIP & Cloud Phone Help