atcomsystems.ca/forum
Posted By: zrhedd Revert Back to Orig Config - 08/26/07 09:15 PM
Hi there! Let me get straight to the point... Is it possible to revert back to original configuration after we upgraded the MP version of NEAX 2000 IPS (i.e. from R7 to R9)? Then, how?
Any reply is very much appreciated. THANKS!
Posted By: DrPbx Re: Revert Back to Orig Config - 08/27/07 12:34 PM
You would need the old R7 disc, but it can be done. What isn't working after the upgrade?
Posted By: doghart Re: Revert Back to Orig Config - 08/27/07 04:41 PM
I believe you'll also need all of your key keeper floppies or CD to be re-installed after a down-grade.

D
Posted By: zrhedd Re: Revert Back to Orig Config - 08/31/07 02:17 AM
PN-32 IPLA IPPADC with PN-16VCTA card can no longer be accessed right after we upgraded the MP. We wish to revert it back to R7 to resolve the problem. Any idea?
Posted By: DrPbx Re: Revert Back to Orig Config - 08/31/07 07:48 AM
I use a 32Ipla on my R13. They still work on all revisions, the newer 8Ipla's just perform better & have built in compression (no VCT's needed).
© Sundance Business VOIP Telephone Help