atcomsystems.ca/forum
Posted By: NECIPK AUTO TRANSFER TO VOICE MAIL - 09/25/07 08:12 AM
Hi, on a NEC IPK system, while in program mode, what memory block do I need to use to set the number of rings before it is transfered to voice mail on a station?
Posted By: paulw Re: AUTO TRANSFER TO VOICE MAIL - 09/25/07 01:39 PM
I assume you mean the Call Forward No Answer timer?? Try 1.2.22. Rule of thumb is 20 seconds here..
Posted By: NECIPK Re: AUTO TRANSFER TO VOICE MAIL - 09/25/07 02:04 PM
Well not realy, once a call is transfered to the station (215), I want it to ring 5 times and if no one answers to go into voice mail (300).
Posted By: doghart Re: AUTO TRANSFER TO VOICE MAIL - 09/25/07 04:46 PM
What Paul W said:

Set the timer in prog 1-2-22 (20-24 seconds is about 5 rings) Note that this timer is system wide. In the newer release of software you have timers 1-4, 4 is the default for all users.

Then call forward bsy/no ans the stn 215 to vm (300)

From stn 215 dial 43 then 300.

D
Posted By: NECIPK Re: AUTO TRANSFER TO VOICE MAIL - 09/26/07 05:58 AM
Thank you!! c(-~)0
© Sundance Phone System Forums - VOIP & Cloud Phone Help