atcomsystems.ca/forum
Posted By: JDaniels Nitsuko DX2NA problem - 10/01/07 08:06 AM
We have this phone here in the office. An old employee set the phone up so that it would ring when someone dials their extension instead of just being an intercom. All of the other phones in the office are set up so you can just dial the extension and start speaking. Can anyone tell me how to fix this phone so it doesn't ring when called from another extension?
Posted By: skip555 Re: Nitsuko DX2NA problem - 10/01/07 08:19 AM
are you direct dialing the extension (intercom xxx ext number )or reaching it through a programmed button ?
Posted By: JDaniels Re: Nitsuko DX2NA problem - 10/01/07 08:33 AM
we are direct dialing. We just dial the 3 digit extension, we don't even have to hit an intercom button. When I call someone else, I just pickup the handset and dial the 3 digit extension and I am automatically on their phone.
Posted By: skip555 Re: Nitsuko DX2NA problem - 10/01/07 08:49 AM
try this


To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle CALL key.
2. Dial 821.
3. Press SPK to hang up.
This disables Forced Intercom Ringing

or this

To change the way your Intercom call signals the extension you are calling:
1. Dial 1 or 812.
If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination.
This option is also available at single line telephones
Posted By: JDaniels Re: Nitsuko DX2NA problem - 10/01/07 09:03 AM
That did it! Thank you so much! That phone has been stuck that way for such a long time! You have been such a help!
Posted By: skip555 Re: Nitsuko DX2NA problem - 10/01/07 09:09 AM
glad it was that simple
© Sundance Business VOIP Telephone Help