atcomsystems.ca/forum
Posted By: bditech elite 192 - 01/20/10 09:19 AM
I have a customer with the 192 and we have done work for this company on wiring and some small changes. Now they would like the night ring over the paging. They have S/L ports open if thats what I have to use what kind of interface would I need I dont think the V-2001A will work on S/L. Question is are there shorting contacts to use for the night ringing on the 192? I didnt see where to program it for night ringing only for S/L.
Thanks
Posted By: necpbxtech30 Re: elite 192 - 01/20/10 09:29 AM
If you are wanting dry contacts for night ringing / Chime, you will need an ECR card.

From the Manual...

The ECR-U( ) ETU provides external relay control for Zone Paging systems (3 relays), External Ringing control (4 relays), Night Chime ringing control (1 relay), and two general purpose relays. There are two audio jacks. One provides the both-way audio-for-paging system. The other provides a tone output for External Tone Ringing and Night Chime.

You will probably have to get a refurbed card these havent been around for a while.
Posted By: Rickman Re: elite 192 - 01/20/10 09:35 AM
It's MB:2-08 LK-5 For Night Chime. You'll also Need a ECR Card(External Control Relay)Installed.
Posted By: bditech Re: elite 192 - 01/20/10 10:29 AM
I do have the ECR-U1 ETU card so the chime relay will send a signal to paging amp. So just need to hook up relay to amp input and program LK-5 MB2-08
Thanks
Posted By: Rickman Re: elite 192 - 01/20/10 10:44 AM
You Got IT. :thumb:
Posted By: bditech Re: elite 192 - 01/20/10 01:18 PM
Anyone send me a digram of the ECR I looked and couldnt find one.
Thanks
Posted By: Rickman Re: elite 192 - 01/21/10 05:38 AM
Email Sent
Posted By: necpbxtech30 Re: elite 192 - 01/21/10 06:39 AM
PM Sent
© Sundance Phone System Forums - VOIP & Cloud Phone Help