I just upgraded an SV8100 fro 2.50 to 3.01. Now I can't log in. I defaulted the system, was able to log in, did an upload and now I can't log in again. Checked 10-12-01 and 10-12-02 and they are at the default settings. Any ideas?

Have a look at MB 90.54.01 and 02. They should be 80 and 8000. I have found after some upgrades both of these change to 8224 .. You may have to do a hardware or default upload to reset these..

Thanks paulw. I'll have a look at these next time I go there.