Hi everyone! I need to quickly figure out how to program my headset for a Elite IPK II d term 80. help please!!!

Try This : To Program a Line key as a Programmable Function Key:
1. Press the Speaker key.
2. Dial Service Code 751.
3. Press the Line Key to be programmed.
4. Dial the code (05) for the desired feature plus additional data if
required.
5. Press Speaker to hang up.
Note: Service Code 00 will erase the function from the key.
Note: In some cases, the Hold key needs to be pressed before
pressing the Speaker key.
*
# # = Accepts an entry (only required if two letters on the same key are
needed - ex: TOM). Pressing # again = Space.
Conf Clears the character entry one character at a time (used when entering
the Name).
Exit Clears all the entries from the point of the flashing cursor and to the right
(used when entering the Number, this clears both the number and
name).
Key for Entering Names
Use this
keypad
digit . . .
When you want to. . .