Hey Guys,
I Installed an SV8100 All IP Phones (40) CPU- 5.01. I'm having a Problem with Internal Paging. When 701+0,1 or 2, is Dialed, I get the Double Spalsh Tone but no Audio :shrug: Anyone Seen this Before?
Note: Also using SIP Trunking.

haven't seen this before but.

Maybe PRG 15.05.38 Multicast paging may be your problem. Try setting it to unicast..

Also remember you should not "PAGE" to more than 16 IP phones.

NEC recommends 32, but I'll tell you for a fact that 16 is the limit.

Maybe you'll be installing some over-head paging... ??

D