PVAA as Conference Bridge in 8100 - 11/01/11 11:51 AM
SV8100 5.02
PVAA card 1.06 build 1111 (latest)
I have the bridge currently configured for 8 on the fly conference connections and 0 scheduled conference connections.
Like so:
-- Configuration/System Settings/Bridge Configuration:
--Port Capacity =8
--Port capacity for preset conference=8
--Max Participants per conference =0
The bridge works fine, when it works.
The client has to hard reset the PVAA card to get it to respond sometimes. I would guess at least once or twice a month. Web interface doesn't repond and the DID number pointed to the Bridge is RNA.
Once the bridge is reset it will function normally for several conference calls then lock up for whatever reason.
Trunks are ISDN PRI.
PVAA is installed in chassis 3 of a 3 chassis system.
I don't see any updates for download on NECNTAC, anyone else come accross this issue and able to correct it?
Thanks
D
PVAA card 1.06 build 1111 (latest)
I have the bridge currently configured for 8 on the fly conference connections and 0 scheduled conference connections.
Like so:
-- Configuration/System Settings/Bridge Configuration:
--Port Capacity =8
--Port capacity for preset conference=8
--Max Participants per conference =0
The bridge works fine, when it works.
The client has to hard reset the PVAA card to get it to respond sometimes. I would guess at least once or twice a month. Web interface doesn't repond and the DID number pointed to the Bridge is RNA.
Once the bridge is reset it will function normally for several conference calls then lock up for whatever reason.
Trunks are ISDN PRI.
PVAA is installed in chassis 3 of a 3 chassis system.
I don't see any updates for download on NECNTAC, anyone else come accross this issue and able to correct it?
Thanks
D