atcomsystems.ca/forum
Posted By: BTECH NEC IPK CNF-8 - 11/04/11 03:25 PM
Anybody remember how to default the CNF -8 card?
It is the old conference bridge card and the default password was changed. I am trying to wipe it so I can get in and change the greetings, etc.
Any help out there??
Posted By: DrPbx Re: NEC IPK CNF-8 - 11/04/11 09:00 PM
Try changing to the party size, reboot & then back. That should reset the password.
Posted By: BTECH Re: NEC IPK CNF-8 - 11/05/11 08:02 AM
Thanks Doc. tried this several times and nothing. The defaults did not work.
Posted By: paulw Re: NEC IPK CNF-8 - 11/06/11 11:56 AM
I found this on an document that may help

General
The supervisor password can be reset to 0000 (default) as follows:
1. Call the CNF ETU.
2. When prompted for supervisor password, dial *19*# (no prompts are heard at this time).
3. Press the Reset Switch SW1 to reboot the CNF(8)-U13 ETU.
Posted By: BTECH Re: NEC IPK CNF-8 - 11/06/11 12:37 PM
Worked like a charm Paul!! Thank you, I was going crazy looking for this!!
© Sundance Business VOIP Telephone Help