atcomsystems.ca/forum
Posted By: BTECH SV8300 and um 8000 - 08/29/12 06:00 PM
Hello we have an sv8300 with um800 setup and all of the phones are IP phones. We cannot get the phones to show the message count in the display when there are more then 1 message. Has anyone run into this issue? Thank you in advance!
Posted By: DrPbx Re: SV8300 and um 8000 - 08/30/12 09:26 PM
Is 08>025>1?
Posted By: BTECH Re: SV8300 and um 8000 - 09/07/12 05:19 PM
Hey Doc, this command is set to a 1.
According to NEC the message count does not display on the 8300 IP phones.
© Sundance Phone System Forums - VOIP & Cloud Phone Help