Ok boys and girls. I am working on a old CTI-u10 the operating system is os2. I can connect a monitor, key board and mouse to the card and access the program. But when I connect with a null cable to the com port. I can not get CoSession to connect. I have change the ip address and can ping it. CoSession is ver 7. Switch 3 has 1&2 off and 3&4 on. I have tried to connect at 14400, 19200, 57600 direct connect. What am I doing wrong??? The other question I have is can get access through the network? I think the answer will be no. The next question I have a backup of a fms card can this be restored in the CTI-u10

CoSessions does not work on the CTI you have to browse into it.

It is not an Lx. It is an os2 operation system, I did not think you could browse into it?

I only have one of these in the field and I cannot for the life of me remember how I got into it, but somting is telling me that you do browse into it like an LX.

Sorry, I know that's not much help, but it's been ages since I've been to that site.

D