I have a client with a DSS console lit up like a christmas tree. The buttons are all programmed function 01 DSS/One touch. The operating mode is default, business mode. The DSS console is operating as it should. A lot of extensions are set up to forward off site, and those flash on the DSS console. I have not been able to find a setting to either light them up steady red or off. Off would be preferable, LED pattern 0. I looked in program 30-05. Any suggestions?

Try call coverage keys.

try PRG 35.02.02 and 03 and have a play with those two..

Program 30-05 is the right place, I get asked to do this all the time.

It's 30-05-03.

CFD-ALL uses the same lamp flash as DND.

D

This fixed the issue. I changed the setting to 0 - no flash on DND. Thanks.