Using a SV8100 for 2 buildings. The first has 3 lines and 8 digital sets. I can get inmail to answer after 4 rings if no one answer and in night mode. The 2nd building is 4 lines and 14 sets and I can not get the inmail to answer after 4 rings or on night. We have set up the lines and sets in 2 different groups in all of the different programming areas.
Found a 12-08 was set wrong for night so it is working. Still trying to get no answer ring to work.
need more info
What is this second buildings lines doing during the day, and night etc
also what are the lines doing for the first building?
need more info
What is this second buildings lines doing during the day, and night etc
also what are the lines doing for the first building?
as in lines are set to normal? DID? DILs ? VRS ? etc etc
Sorry, was able to figure it out. Found that I had forgot to program the lines as DIL in the night under mode 2.Had done it correctly for the first building but on the second.
Thanks