Does anybody have the manual for the NEC AD(A)-R unit? It's a recording adapter for Dterm i phones and has a bunch of dip-switches on it and I need to know how to set those switches for it to work.

Even if you don't worry about sending the manual, just describe here what those switches do, that will help.

Thank you.

This can be found in the key system IPK installation manual.
Table 9-2 AD(A)-R Unit Switch Settings
Switch Description/Settings
SW1
SW1-1 Connects to Multiline Terminal
Connect = Default
SW1-2 Not Used
SW2
SW2-1 Sets External Equipment Impedance to 600 Ω
SW2-2 Used for Complex Impedance Devices
(< 30 Ω Input Impedance)
Dip
Switches
(DSW)
DSW 1
Output Hook Signal to External Device
On = Output
Off = No Output (Default)
DSW 2
Record Confirmation Tone
On = Tone On
Off = Tone Off (Default)
DSW 3
and
DSW 4
Use T1/T2
On = Disable (Default)
Off = Enable
DSW 5
Reset Signal Upgrade
On = Normal (Default)
Off = Debugging
DSW 6~8
Firmware Upgrade
On = Firmware Upgrade
Off = Disable (Default)
􀀀 Do not connect T1 and T2 when DSW switches 3 and 4 are On