DSX-80 with PRI. Need help to setup DIDs - 06/30/14 04:10 PM
We have Managed IP PRI service from TDS Metro.
18 channels open and block of 30 DIDs.
main(pilot) number is (XXX)XYZ-5850
block of numbers (XXX)XYZ-5110 to (XXX)XYZ-5137
If I call any of our numbers, key for Line 1 will light, second call will go to Line 2 and so on.
All Lines have identical setup:
3101 Loop Start | name and number are blank | DTMF checked
3112 Key Ring with overflow to 801.
How to make calls coming thru (XXX)XYZ-5111 to terminate on particular Line?
According to one TDS technician they send 7 digits to CPE and expect 7 back
Ive tried to setup DID translation entry
3301 to 7 digits
3302 entry 1 to ***5111 | 313 | 313 | TEST LINE | use line
and switched Line 1 to DID Immediate Start. Test calls will not route to 313 extension.
am i missing something?
18 channels open and block of 30 DIDs.
main(pilot) number is (XXX)XYZ-5850
block of numbers (XXX)XYZ-5110 to (XXX)XYZ-5137
If I call any of our numbers, key for Line 1 will light, second call will go to Line 2 and so on.
All Lines have identical setup:
3101 Loop Start | name and number are blank | DTMF checked
3112 Key Ring with overflow to 801.
How to make calls coming thru (XXX)XYZ-5111 to terminate on particular Line?
According to one TDS technician they send 7 digits to CPE and expect 7 back
Ive tried to setup DID translation entry
3301 to 7 digits
3302 entry 1 to ***5111 | 313 | 313 | TEST LINE | use line
and switched Line 1 to DID Immediate Start. Test calls will not route to 313 extension.
am i missing something?