I see there is only one page port on the main cabinet .Is this what is recomended or should/can I use a PDGU .I dont see it listed in the pricing list I was just curious

Thanks

JD

Unless you just want to buy a PGDAD or need more than 1 port.

Or you could use an SLT or trunk access a multi-zone paging interface - We use PGDAD's, but when you have 3, 4, or 5 different areas they want paged "separately," (and price may be an issue) just use a multi-zone paging interface...

If the account is blessed with several unused SLT ports, you could also put one on each port too (all page could be an issue at some sites)