atcomsystems.ca/forum
Posted By: Ray01 SL 1100 - 01/23/16 03:01 AM
Installing a Viking E 30 DoorBox. Ive got it on port 11 in 11-02 SLT. In 10-03 SLI its showing on port 3 as it should. In 32-02 when I add other stations for it to ring , I press the Doorbox and nothing happens. I delete the stations I added in 32-02 and still nothing happens.
Posted By: Toolie Re: SL 1100 - 01/23/16 03:09 PM
Have you tried calling the doorbox from a phone set to make sure it's working? If you dial service code 702 then the doorbox number - you should be able to call it.
Posted By: brokeda Re: SL 1100 - 01/23/16 09:45 PM
Conditions
• The Door Box Feature Requires an unused analog extension port (084M-B1: ST3-ST4 fixed) on the
each KSU.
• To use Door Box PRG 10-03-05 (SLI PKG): 1 : Doorphone needs to be set.
• Door Boxes can ring Multiline, Single Line, and wireless telephones.
• A Door Box cannot ring a virtual extension.
• External Call forward by Doorphone can forward Doorphone calls Off-Premise while a user is away.
This feature only works for ISDN lines.
• Off-hook signaling is available for Door Boxes. If an extension user is on the telephone, the Large
LED flashes indicating the Door Box ringing, and the display shows a call from the door box.
• The door strike cannot be activated when a door box is forwarded off-premise.
The door phone number programmed in 15-03-19 for Single Line Door phone must be different than
other non-SLT door phones. (V4.0 or higher)

Single line door phone acts like a single line until the hotline time expires then it will call the
doorphone destination. (V4.0 or higher)
The door phone access service code (PRG 11-12-36) cannot be used for SLT doorphone. (V4.0 or
higher)

When talking to a single line door phone, pressing flash will activate the doorlock release. (V4.0 or
higher)
Posted By: Ray01 Re: SL 1100 - 01/24/16 02:42 AM
Yes, The Doorbox does work.
Posted By: Ray01 Re: SL 1100 - 01/24/16 02:43 AM
Thank you Brokeda, I will give it a try
© Sundance Business VOIP Telephone Help