I have an analog single line port connected to a page amp so that CO trunks ring the analog station and that causes the amp to ring over loud speakers. Works good.

The customer has noticed, and I've verified it, that the analog station and page horns ring a moment before the multiline phones ring.

I've set program 10-08 to checked in the SV9100. This is pre-ringing and should cause an immediate ring to the phones. But it doesn't. I see no change. Paging rings a little bit before the phones.

Jim

It's waiting for caller ID.

So, either turn off CID, or wait for ringing to start? I hope they can wait for a half a ring cycle.

Thanks.
Jim