Hi, I need to start using the DSS's I have a couple of Nitsuko 110B DSS Console, according to what I read, I don't need power supply if I connect one (no cascade) directly to a telephone. But I don't have the cable, is that a common cable that I can purchase online? How could I make one, does any one knows the pin out diagram for it?

Thanks in advance!

Pretty sure that unit is port powered from a separate port.

That's correct, it is on a separate port. There's also a bit of programming to make it work.

Data Cable:
I have the manual already, but it does not specify what kind of data cable does it needs or what is the pin-out of the cable. Any idea?

A/C Adapter:
So do you mean that the units needs an separated a/c adapter ? Manual says that no a/c adapter needs if connect directly to phone, and only A/C adapter is needed if cascade more than one DSS console.

You really need to get a tech for this before you blow up a circuit card or phone.

I was thinking in just order a new DSS console, it might come with its own cable...

would it come with the cable?