atcomsystems.ca/forum
Posted By: Lee07 Signalling & Tones in SV8500 - 09/07/17 06:03 AM
Hello
I need details specifications about signaling & tones used in the sv8500 PBX. The info needed are those like interdigit timer, hook flash timer, busy tone, fast busy tone "reorder tone", call release/disconnect timer...etc...
Any one can help?
Thank you
Posted By: helpifican Re: Signalling & Tones in SV8500 - 09/07/17 12:43 PM
All of that is fully programmable in ASYD. If you are not the installer/programmer, then contact your vendor for that information. ASYD mistakes can turn a phone system into a pile of scrap metal if you are not careful. At the very least, you would need a print out of ASYD (LSYD, sys 1, 2 & 3) to determine those settings.
Posted By: Lee07 Re: Signalling & Tones in SV8500 - 09/08/17 07:47 AM
Thank you for reply...
forgive my ignorance, I searched in the command manual for the default value of hook switch flash timer , call release / disconnect timer but I could not find any value..!

UNIVERGE SV8500
FP85-108 S5
COMMAND MANUAL
© Sundance Phone System Forums - VOIP & Cloud Phone Help