Hi,
I am trying to setup external paging to a Valcom v-9937 external paging system but cannot get it to work. (no audio when dial 803), internal paginging to the handsets work ok.

Could someone point me into the right direction, the wiring that is required for the Audo RJ45 port, and also the sys cofig setup for it to work?

Thanks

Look at combined paging I THINK code used to be *11.

The 2 outside pins are Paging.

In PRG10-60-03 (External Speaker1), PRG10-60-04 (External Speaker2) and PRG10-60-05 (External
Speaker3), set the corresponding slot number of 082U board. Then an Audio Out port on the 082U
works as External Speaker1-3.