I've been trying to figure this out, how to use a trunk access code to access a specific trunk. I did assign the specific trunk to trunk group 3 and can access it by dialing 8043. But I'd like to be able to just dial 94 or just 7 to access that trunk, or the trunk group. 93 is used to access the main trunk group (1). I've been in 11-01 and tried a few things and could not get it working. If I set individual trunk access code in 11-09, how does the system know which individual trunk I want to access?

I believe you dial #9XXX with XXX being the trunk number, 001, 002, etc.

Aspire S? Man what are you trying to do? What is your application? I can't imagine many trunk groups in an Aspire S? What max of 8x24x2 or something?

#9010 is more digits than 8043 just want to program something simple like 94 to access trunk 10. I have trunk 10 connected to the external paging systems which requires additional digits to select zones, etc. Trying to simplify access to that trunk.

Do you have a button available on their phones? If yes DSS/ One Touch in 15-07

Most are Analog extensions

Why not just use the page port on the system?

Paging port doesn't seem to work, Paging system gives dial tone which is appropriate for trunks, also most extensions in the system are analog so accessing the paging port would be difficult from an analog extension.