atcomsystems.ca/forum
Posted By: whozitsdad NEC SV9100 and Comcast PRI - 10/12/19 08:11 PM
Afternoon all.
Found this site searching for answers. Curious if anyone has had any dealings with Comcast and their PRI delivered via a simple Arris 820, into an Adtran 908e?
Replacing old Panasonic PBX with a 9100. Can dial out, but rings busy dialing in.
Thanks in advance
Terry
Posted By: Coral Tech Re: NEC SV9100 and Comcast PRI - 10/13/19 01:24 AM
Literally have 100's of these on Comcast PRI's. Program the PRI and translation tables. Verify how many digits they are sending etc.
Posted By: Meyery2k Re: NEC SV9100 and Comcast PRI - 10/14/19 02:01 AM
One tool within PC Pro that I have found helpful is the debug terminal. You can see the D-Channel information when a call comes in. You will either see the digits being sent by the carrier, or nothing if they are not sending the call your way. If the digits are not matching your programming then you can easily adjust programming and the DID tables to get incoming calls working.
© Sundance Phone System Forums - VOIP & Cloud Phone Help