atcomsystems.ca/forum
Posted By: Beerslayr NEC SV9100 PMS - 11/20/19 11:28 PM
Ever integrate over IP with TimeShareWare PMS?
We're trying to set up the integration on a machine off site connected via VPN but they were expecting the NEC to be able to output the PMS data to an IP address. All that is available in the LUA is a port.
They are now building the interface on a local machine on the same LAN and we'll test again but I'm a little concerned about their side.
I took a look at their interface settings and these are the only types of PBX:

Alcatel
Avaya
Fujitsu
HCX5000
Iwatsu
Meridian
Mitel
NEAX2400
Tadrian

I saw no option for NEC SV9100, SV8100, SL2100, SL1100, or Aspire

Once they have the new interface up I'm wondering if I should change my protocol from KTSI w/ENQ to NEAX 60/90 and have them set to NEAX2400 and see what happens.
Posted By: Coral Tech Re: NEC SV9100 PMS - 11/20/19 11:51 PM
If anything it must be NEAX. Are you using the PMS interface?

https://www.hitecphonesystems.com.au/pdf/UNIVERGESV9100Hotel_MotelManualIssue1.0.pdf
Posted By: Beerslayr Re: NEC SV9100 PMS - 11/21/19 12:06 AM
Yeah we're using the LUA PMS API Converter 1.0.3. No more PVA card. Works excellent in our other deployments using IP to Serial converters
Posted By: Beerslayr Re: NEC SV9100 PMS - 11/21/19 11:35 PM
Well it worked right away once they had the interface built on a local machine and pointed to the PBX. Used HCX5000 as sub type in their config. Had to turn BCC to none because they were getting an error after the data swap but otherwise no issues using KTSI w/ENQ
© Sundance Phone System Forums - VOIP & Cloud Phone Help