I am trying to hook up 2 external page zone using a IP8WW-2PGDAD-A

I currently don't have any RCA cords and thought I could use the connections inside the Pgdad

just not sure where to put them


I notice this device is newer than the previous one it has dip switches as opposed to the connectors that you have to move

leds are working

any thoughts


Thanks !

JD

Log into Web Pro, look at 10-03, confirm slot and port the digital station blade is in that you have the PGD unit connected to, it should say
PGD paging, if you see MLT disconnect the PGD, set the setting in 10-03 to PGD paging, upload, disconnect from Web Pro wait a minute or 2 and reconnect the PGD unit