Hello,

I am trying to find a way on a SL1100 Auto Attendant InMail
programming that will send the caller directly to Voice Mail.

Presently when a call comes in and the AA picks up the
caller can select 1 for Ext. 101. The call then rings Ext. 101
and it rings a number of times till it is then answered.

Isn't there a way to direct a Press of the 1 to go direct to
the VM for Ext. 101??

I think there is but can't find it.

I have PC Pro Set up for a Remote Connect to the system.
So I just need the address and the data to enter.

Any assist would be great.

Thanks,

Les

Change the action from Unscreen transfer to recording 1

Hi dans,

Just confirming.

So in 47-13 InMail Dial Action Table change the action to
"Unscreen Transfer" to Recording 1 and Ext. 101 in the
Destination??

I will make that change and test.

Thanks for the hint!! Timing is perfect!!

Les

Ok, I have made the change as suggested and WHOOPIE!!

I does as it should!!!

I have other systems set this way but just could not remember
what was needed this time. aka Old Age!!

Thanks again!!

Les