Hi All,
Have 2 SV8100 which were CCISing for extension calls ok on a flat network, then IT have changed things and put in a VPN between sites and split the subnet into 2, now only one way transmission Site A cant here site B. I think it is the VPN but to make sure here is the relevant programming.

Site B went from 192.168.0.xxx to 192.168.2.xxx
At A changed 500301
At B Changed to 101203, 101209
rebooted both sites.


SITE A SV8100
-------------------
101201: 0.0.0.0
101202: 255.255.254
101203: 192.168.0.3
101209: 192.168.0.160
101213: 192.168.0.3

500209: 0, 56K,1, 0, tick, 0
500301: 2, 0, 192.168.2.170, tick

840601: 10020
840602: 10021
842601: 192.168.0.161, 10020, 10021
842602: 192.168.0.162, 10052, 10053
842603: 0.0.0.0


SITE B SE8100
--------------------
101201: 0.0.0.0
101202: 255.255.255.0
101203: 192.168.2.3
101209: 192.168.2.170
101213: -

500209: 0, 56K, 2, 0, tick, 0
500301: 1, 0, 192.168.0.160, tick

840601: 10020
840602: 10021
842601: 192.168.2.171, 10020, 10021
842602: 192.168.2.172, 10052, 10053
842603: 0.0.0.0



I reckon this right but before I travel to a distant sites and start Wiresharking, or talk to IT what do you think?

regards

99% of the time it's the network. And when IT says it's ok it shoots up to 99.9%. :P