atcomsystems.ca/forum
Posted By: SPXGhost Repartee and Toshiba Strata DK 424 - 05/23/19 08:56 PM
Does anyone have the settings in the Repartee EASYMADE SWITCH SETUP screens 1 thru 4 for a Tohiba Strata DK 424? The original drive finally gave up by cutting the platter away from the spindle, after 15+ years of service.
Posted By: phonemeister Re: Repartee and Toshiba Strata DK 424 - 05/26/19 08:00 AM
Number 1 on page 1 of the Easymade Switch Setup defines the make and model of the phone switch. In this case, you would just type Tos in line 1 and press Enter. Type Y to accept the phone system offered or N to go to the next until you get to the DK424. You didn't mention what version of Repartee you have and whether or not you are using SMDI integration. If the DK424 is not listed, you can use DK280. After choosing the DK424 as your telephone system, you shouldn't have to change any of the other settings as they are fine as default. However, if you are using SMDI you will need to put in the integration options in line 2. For line 4, if you have call forwarding set on each phone I would add a Q after the transfer initiate (eg. &X1Q) so that the Repartee will perform an unsupervised transfer.
© Sundance Phone System Forums - VOIP & Cloud Phone Help